Re: Problems with the set-mark-command

["T. V. Raman" <raman@Adobe.COM>]

The advise on kill-region and mark-region-as-kill are
sufficiently simple that I can assure you that that is not
the problem.

I suspect there is something in your environment that is
indeed deactivating the mark --check if you have
accidentally turned on transient-mark-mode.

You can disable the advice of specific commands by using M-x
ad-disable
and M-x ad-deactivate
-- though I dont recommend the above unless you know what
you are doing.

The fact that C-x C-x is switching point and mark is a
pretty strong indication that you have something in your
environment deactivating the mark when you are at your
workstation and move the cursor.
And as I say above, one possible culprit is transient-mark-mode

-- 
Best Regards,
--raman

      Adobe Systems                 Tel: 1 (408) 536 3945   (W14-612)
      Advanced Technology Group     Fax: 1 (408) 537 4042 
      (W14 129) 345 Park Avenue     Email: raman@adobe.com 
      San Jose , CA 95110 -2704     Email:  raman@cs.cornell.edu
      http://labrador.corp.adobe.com/~raman/        (Adobe Intranet)
      http://cs.cornell.edu/home/raman/raman.html    (Cornell)
----------------------------------------------------------------------
    Disclaimer: The opinions expressed are my own and in no way should be taken
as representative of my employer, Adobe Systems Inc.
____________________________________________________________

-----------------------------------------------------------------------------
       To unsubscribe or change your address send mail to
"emacspeak-request@cs.vassar.edu" with a subject of "unsubscribe" or "help"